How to Install IOX-NFC Reader?

Applies To

  •  IOX-NFC


  1. Make sure the GO device is properly installed and communicating.
  2. Unplug device and remove IOX expansion port cover on GO device.
  3. Plug in the USB connector of IOX. Secure connector with zip tie, do not overtighten.
  4. Locate NFC Reader within safe reach of driver. Keep in mind wiring when choosing location of Reader.
  5. Once IOX-NFC has been connected to GO device, connect GO device to port.
  6. Test NFC reader by touching the NFC tag with the reader. Green LED on Reader should flash twice.

Additional Notes

Detailed installation document:  IOX-NFC Reader

Instructional Video: How to Install Geotab IOX NFC Reader