Can IOX®-RS232 be used to send GO device information to an external Device?

Applies To

  • IOX®-RS232
  • GO device
  • Hardware Development Kit (HDK)

Answer

Yes, IOX®-RS232 can be used for sending the Data from the GO device to an External device.

Additional Notes

Additional documentation on this topic can be found at the link below:
https://geotab.github.io/sdk/hardware/addon-protocols/rs232-usb/ 

Any custom Id can be used for the external device. However, the external device is required to make message type 0x85 requests to the GO device in order to get the message type 0x21 response back.