How to check if Iridium is connected

Related Questions

How to verify if SATIRD is installed / reporting correctly 

Applies To

  • MyGeotab
  • IOX-SATIRDv2
  • Iridium 

Procedure

  1. Navigate to Engine & Maintenance > Engine and Device > Measurements 
  2. Under Options > Diagnostics, select IOX Iridium (1 = present)
  3. Select vehicles and date period accordingly 
  4. Click Apply Changes 

Additional Notes

The log only appears when there's a status change, so if the iridium is continuously connected with the GO device, you may need to extend the date period to see the log.